Light-Bot Board Editor
Boards created here can be used in the interactive applet.
Instructions
There are three things that can be edited:
Tile height
The height of an individual tile can range from 1 to 64. The current height of each tile is indicated by the number in its upper left corner. To change the height of an individual tile, select "raise" or "lower" as the mouse action and then click on the square you would like to change.
To change the heights of all of the squares at once, use the two buttons provided. This could be helpful, for example, if you want to have one tile that is lower than all the others. In that case you could raise all of the tiles, then lower one of them.
Starting position and orientation
To change starting position and orientation, choose the appropriate mouse action. Move the robot to a different starting position by clicking on that tile, and change the orientation by clicking on the robot.
Targets
To toggle target tiles on and off, select the appropriate mouse action and then click on the tiles.
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|